Hangzhou Kaishan Air Compressor Co., Ltd
Hangzhou Kaishan Air Compressor Co., Ltd professional, focused and attentive
Add to Cart
(1.5MPa)KT5 Integrated Open-Air Crawler Drilling Rig/High efficiency drilling rig for sale
Introduction of KT5 smallest open air Integrated type crawler drilling rig for sale (Depth 25m Dia.hole 80-105mm )
"Kaishan" brand KT5integral type high wind pressure openair crawler drilling rig is using a power to drive hydraulic system and high wind pressure screw compression system at the same time, compact structure, highly energy utilization, with automatic unloading rod, cabin air conditioner and dry dust collector such functional module. Jumbo has good integrity, environmental protection and energy saving,high degree of automation, drilling effect is good, convenient operation,flexible, driving safety, etc. Suitable for openpit mine, quarry, highway,railway, water conservancy, electric power, construction and other medium and deep hole in the stone engineering extension rod drilling
Application of KT5 smallest open air Integrated type crawler drilling rig for sale (Depth 25m Dia.hole 80-105mm )
1.Geological exploration;engineering geology investigation and kinds of survey hole in concrete structures.
2. Diamond bits,hard metal bits and steel-shot could be selected to different layers.
3.The drilling depth which is 100m or 180m must be suitable for the final hole diameter 75mm or 46mm.The drilling depth could not exceed its 110%.
1. New type feeding system
2. Famous brand engine
3. Reliable hydraulic pump set
4. Humanized design
A. Range of application
(1Geological exploration; engineering geology investigation and kinds of survey hole in concrete structures.
(2)Diamond bits, hard metal bits and steel-shot could be selected to different layers.
(3The drilling depth which is 100m or 180m must be suitable for the final hole diameter 75mm 0r 46mm. The drilling depth could not exceed its 110%.
B. Feature of the drill
(1)Easy operation and high efficiency as the hydraulic feeding be taken
(2)As the ball type chuck and the driving rod, it can complete no-stopping rotating while the spindle relift.
(3The pressure indicator of bottom hole can observe and control the well conditions easily.
(4)Close levers, convenient to operate.
(5Compact size and light in weight are easy to set up and transport on working plains and mountain area.
C.The technique parameter:
| KT5 technical parameters | |||
| Hardness of rock | f=6-20 | Car-riage pitch Angle | 114° |
| Diameter of hole(mm) | 80-105 | Car-riage angular | Right 36° left 35° |
| Depth of the hole (m) | 25 | Car-riage lateral level swinging Angle | Right 12°~93° |
| speed(Km/h) | 2.2 | Re-entry arm angular | Right 45° left35° |
| Grade ability | 22° | The leveling Angle frame | Up 54° down 26° |
| Road clearance(mm) | 430 | Apush length(mm) | 3000 |
| Grade ability | 239 | Compensation length(mm) | 1200 |
| Diesel motor | YC6A180Z-T21 | Hammer | KQG35A |
| Displacement (m³/min) | 10 | drill pipe | φ64×3000mm |
| Exhaust pressure(bar) | 10.5-15 | Connect stem implement ability | 5+1 |
| Dimension (mm) | 6500×2400×2600 | Catching dust way | Dry type (hydraulic drive whirlwind layer streaming) |
| Weight (Kg) | 8000 | Connect stem way | Automatic picking discharge stem |
| Turning speed (r/min) | 0-63 | Since artery card way | Electro-hydraulic vacancy prevent card |
| Rotary torque (N·m) | 1400 | Pipe lubrication method | Automatic spray oil lubrication |
| Biggest push pull(N) | 25000 | Drill pipe thread protection | Equipped with floating street protection pipe threads |
Recommend Below Spare Parts for KT5 :
| Drill bit Dia. | 100mm-105mm | 90 mm-100 mm |
| Drill pipe Dia*L | 64/76x3000mm | 64x3000mm |
| Drill hammer | HD35/HD45/930 | KQ90 |